ENACOM Certification
Details
I. Introduction to Certification
The ENACOM certification in Argentina is a mandatory certification for wireless and telecommunications products. All devices connected to public telecommunications networks and using radio frequency bands are required to apply for ENACOM certification. For the export of wireless communication products to Argentina, it is required to apply for ENACOM certification. The original regulatory body for wireless certification in Argentina was CNC, then it was changed to AFTIC, and after 2015, it was changed to ENACOM.
Ii. Certification Mark
Iii. Certification Categories
1. Homologacion (Argentine Standard Certification)
2. Codificacion (There is no recognized certification under standard conditions).
Iv. Product Scope
All equipment connected to the public telecommunications network and using radio frequency bands
V. Required Documents
1. Spanish instruction manual
2. Product nameplate
3. Photos of the inside and outside of the product
4. Test software
5. Technical Specification sheet
6. Technical data
7. Antenna Specification sheet
8. Customer Basic Information Form
9. Information of Argentine importers (if any)
Vi. Sample Requirements
Three samples
Vii. Certification Process
Send the sample to Argentina for testing
After the test is completed, register for ENACOM
3. Issue a ENACOM certificate
Vii. Certification Cycle and Validity Period
Validity period: 3 years. Certification cycle: 12-14 weeks (counting from the moment the sample arrives in the Argentine laboratory for testing and all the necessary documents are complete)
Viii. Factory Inspection
No factory inspection is required
Ix. Precautions
One model, one certificate
2. One trademark, one certificate
3. The certificate holder is an importer from Argentina
X. Standards for the Use of Logos
Once the certificate is issued to the local supplier, a specific RAMATEL ID will also be issued. This ID must be affixed directly below the RAMATEL regulatory logo (Resolution 854 RAMATEL 2020), which can be composed of different variants. The ID number can be pasted on the right side of the label whether the selected label is a horizontal label or a basic label. The different variants of the RAMATEL tag are as follows:
The regulatory logo (RAMATEL logo) needs to use the Montserrat font. The RAMATEL ID number needs to be in Arial font. The minimum height of the ID number should be 5 points. The measurement values of the selected RAMATEL tag variant are as follows:
|
ENACOM certification from Argentina |
 |
·Detection content: Wireless ·Applicable products: All devices connected to public telecommunications networks and using radio frequency bands · Is it mandatory? Yes · Factory inspection: None · Local agent: To · Plug type: Argentine standard · Voltage requirement: AC230V · Application Method: Direct application · Certificate Holder: · Certificate validity period: 3 years · Official website: · Certificate inquiry website: · Other supplements |
Scan WeChat to chat